Cylindrical Ring Gages - Steel / Chrome

Cylindrical ring gages also referred to as a plain ring gage efficiently inspects the external dimensions of manufactured parts. They can also can be used to set an instrument, air or electronic and come in different designs based on size. Ring gages below 1.510 are manufactured without a flange outer diameter and gages above 1.510” are manufactured with a flanged diameter.

Removing the excess material from the outside diameter of the ring gage lightens up the weight of the gage providing for easier use by the operator. Ideal for use as master and GO NOGO gaging. An annular groove in the periphery of the NO GO ring distinguishes it from the GO ring. With GO NOGO gaging, an inspector can quickly pass or fail parts without taking time consuming readings from a measuring instrument.

Plain ring gages can be used to set air gages, bore gages and internal micrometers. By using the same size master, lead errors on measurements can be eliminated. Ring gage blanks are put through a stabilization process, cycling them through temperature extremes from -130°F to +300°F. The gage is then inspected for size and class in a temperature controlled lapping room and the final inspection is completed in our environmentally controlled metrology laboratory. To ensure maximum wearability all ring gages are lapped to size and polished.

Manufactured in accordance with ANSI/ASME B89.1.6 – 1984. Gage blanks meet all the requirements of B47.1-1981. Roundness and taper of ring gages will not exceed 50% of the applicable gagemakers size tolerance and are non cumulative. Gages are ring lapped to size and hand polished providing for superior accuracy and ensuring maximum gage wearability. Sizes are available from .015” to 29”. Above 5.510” are supplied with tapped holes for ball handles unless specified. WESTport Gage provides a Certificate of Accuracy, traceable to NIST (National Institute of Standards and Technology), free of charge with every gage.